True GDM-45-HC-LD 51 Black Sliding Glass Door Refrigerated Merchandiser

True GDM-45-HC-LD 51 Black Sliding Glass Door Refrigerated Merchandiser. Picture is for reference only and may contain options or accessories that are not included. True GDM-45-HC-LD 51 Black Sliding Glass Door Refrigerated Merchandiser with LED Lighting. The True GDM-45-HC-LD attractively merchandises your products and encourages impulse buys with two "Low-E", double pane thermal glass sliding doors and LED lighting.

The refrigerated merchandiser has a durable, non-peel or chip black powder coated cold rolled steel; durable and permanent and an NSF approved white aluminum interior liner and stainless steel floor. The GDM-45-HC-LD has an energy efficient, factory balanced, refrigeration system that holds 33°F to 38°F. 5-15P NEMA plug & 9' cord. Dimensions: 51-1/8" W x 29-5/8" D x 78-5/8 H. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). High capacity, factory balanced refrigeration system that maintains cabinet temperatures of 33°F to 38°F. 5°C to 3.3°C for the best in food preservation. State of the art, electronically commutated evaporator and condenser fan motors. ECM motors operate at higher peak efficiencies and move a more consistent volume of air which produces less heat, reduces energy consumption and provides greater motor reliability. Bottom mounted condensing unit positioned for easy maintenance. "No stoop" lower shelf maximizes visibility by raising merchandised product to higher level. Exterior - non-peel or chip black powder coated cold rolled steel; durable and permanent. Interior - attractive, NSF approved, white aluminum liner with stainless steel floor. Insulation - entire cabinet structure is foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Welded, heavy duty steel frame rail, black powder coated for corrosion protection. Frame rail fitted with leg levelers.

Variety of sign options available. "Low-E, " double pane thermal insulated glass door assemblies with mitered plastic channel frames. The latest in energy efficiency technology. Each door fitted with 12 (305 mm) long handle.

Counter-balanced weight system for smooth, even, positive closing. Eight (8) adjustable, heavy duty PVC-coated wire shelves 22-15/16" W x 20-9/16"D. Four (4) chrome plated shelf clips included per shelf.

Shelf support pilasters made of same material as cabinet interior; shelves are adjustable on 1/2 increments. LED interior lighting, safety shielded.

Evaporator is epoxy coated to eliminate the potential of corrosion. Convenient clean-out drain built in cabinet floor. Listed under NSF/ANSI Standard 7 for the storage and/or display of packaged or bottled product. Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included.

Most warranties are not valid if uséd at a non-commercial address California Residents Only WARNING: This product may contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. We will stay in contact with you to make you aware of any delay as we get updates from our factories. These items are delivered to your locations via a tractor trailer. You are responsible for offloading the merchandise and bringing your merchandise inside of your location. A lift-gate is a device uséd to raise and lower items from ground level to the level of a tractor trailer.

These trailers are designed to load and unload at a loading dock or with a fork-lift. Usually this is a home, but it could be a church, farm community center, etc.

Businesses run from a home are still considered residential. When you receive the item and sign for it, you own it. This is the only way you will be compensated for the damage! Inspect the outside of the packaging to look for dents or crushed corners. If you see anything even slightly suspicious carefully remove all packaging and inspect the item.

The driver may be impatient but that beats having to settle for a damaged item. What if my item is damaged? This is often the best option if you need to get your item operational and the damage is cosmetic.

If accepted, prior authorization must be obtained to return any equipment. Refurbishing, if necessary, will be an additional charge to purchaser and will be deducted from any authorized credit.